S-band Transmit-Receive Antenna

The S-band Transmit-Receive Antenna consists of a transmit antenna, a receive antenna, a transmit-band filter and a receive-band filter. The transmit frequency bands are 2X00–2X80 MHz and 3X00–3X00 MHz, while the receive frequency band is 20XX–21XX MHz. It realizes the transmission and reception of right-hand circularly polarized (RHCP) and left-hand circularly polarized (LHCP) signals. The isolation between transmit and receive channels is 58 dB.The product design with SMA Female RF interfaces. send-inquiry

Ka-band slot Antenna

The Ka-band Slot Antenna consists of a slotted waveguide array antenna and a servo controller. The antenna radiation frequency band is 32.3–33 GHz. It supports the transmission and reception of left-hand circularly polarized (LHCP) signals. The antenna gain is greater than 35 dBi, and the axial ratio is less than 3 dB. The product features a compact structure and can achieve 2D mechanical scanning. send-inquiry

Dual Circular Polarization High-Gain Omnidirectional Antenna

Dual Polarized high gain omnidirectional base station antenna optimized for 5 GHz frequencie.This antenna is ideally suited for multipoint applications where long range and wide coverage is desired.It is actually one antenna have 2 connectors,horizontal polarized and vertical polarized for both ports.Rugged and Weatherproof. send-inquiry

QV-band Feed Antenna

The main functions of the QV-band feed antenna are as follows: (1) Receive attitude control beam control information, control the antenna beam pointing, and cooperate with the attitude control system to complete the staring pointing to the ground gateway station; (2) Receive forward signals; (3) Radiate and output return signals; (4) Equipped with 2 sets of integrated transceiver antennas to support in-orbit relay use; (5) Support transceiver polarization reuse and shared transceiver antenna send-inquiry

QV-band Reflector Antenna

he Inter-Satellite and Ground Communication Reflector Antenna (ISGC-RA) operates in the QV-band and provides the functions of inter-satellite communication beam transceiving, satellite-ground communication beam transceiving, and mechanical rotation of the antenna. The main tasks of the antenna assembly are as follows: After the satellite is successfully inserted into orbit send-inquiry

Coal‑Saving High-Temperature Fluidized-Bed Furnace

The coal-saving high-temperature fluidized-bed furnace is a high-efficiency, energy-saving, high-temperature heating unit with wide fuel adaptability, particularly suitable for scenarios requiring the processing of large quantities of high-moisture materials with stringent demands for heat source stability. send-inquiry